Sears 917.25446 User Manual download pdf (Page 8)

ASSEMBL

FIGURES

FIGURE 4

COMPARTMENT

NOTE POSITION FRONT WHEEL FORWARD,

a Use a 3/4' wrench to remove lock nut. and

2 - 1/4 ' diameter washer (shown full size below)

from steering column (Fig 31

3. Install Steering Wheel

b. Position steering wheel over steering wheel insert (Fia

3). BARS OF STEERING WHEEL SHOULD POINT

STRAIGHT ACROSS TRACTOR

c Secure steering wheel to steering column using

2 U4 diameter washer and lock nut (Fig 3)

Torque to 68 N-m (50 Ft Lbs.)

d Snap steering wheel cap in place on steering

wheel Steering v\heel cap found in bag of parts

4. Check Tires

Reduce tire pressure to 1 Kg/cnf (14 PSI) in front tires

and0-71 Kg/cnf (10 PSI) in rear tires. (Tires were

overinftated for shipping purposes.)

5 Install Battery

DO NOT SHORT BATTERY TERMINALS

BEFORE INSTALLING BATTERY. REMOVE

METAL BRACLETS, WRISTWATCH BANDS,

RINGS, ETC.

It= BATTERY IS REMOVED, DO NOT

OPERATE ENGINE. SPARKING MAY

OCCUR,

a Lift hood from rear sides (Fig 41

b Make sure drain tube (Fig 5) is fastened to drain

hole in battery tray and battery tray is position

ed in hole of battery support.

c Place battery in plastic tray (battery terminals to

front of tractor) (Fig 5)

POSITIVE TERMINAL MUST BE CONNEC

TED FIRST TO PREVENT SPARKS FROM

ACCIDENTAL GROUNDING

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 55 56

No comments

Sears 917.25446 User Manual Page 8