Sears 917.25953 User Manual download pdf (Page 21)

SERVICE AND ADJUSTMENTS

CAUTION: BEFORE PERFORWNG ANY SERVICE OR ADJUSTIVIENTS:

0 Depress ciutch/brake pedal fully and set parking brake.

« Place motion control lever in neutral {N) position.

« Place attachment clutch in "DISENGAGED” position.

« Turn ignition key “OFF” and remove key.

« Make sure the blades and all moving parts have completely stopped.

» Disconnect spark plug wire from spark plug and place wire where it cannot come in contact

with plug.

TRACTOR

TO REMOVE MOWER (See Fía. 21)

Mower wilt be easier to remove from the right side of tractor,

« Place attachment ciutch in "DISENGAGED” position.

• Move attachment liftleverforwardto lower mower to its

lowest position.

" Roll belt off engine pulley.

« Disconnect ciutch rod from clutch lever by removing

retainer spring.

• Disconnect anti-sway bar from chassis bracket by

removing retainer spring.

• Disconnect suspension arms from rear deck brackets

by removing retainer springs.

• Disconnect front links from deck by removing retainer

SprinQS^

• Raise lift lever to raise suspension arms. Siide mower

out from under tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE

MOWER IS TO BE MOUNTED TO THE TRACTOR,

REMOVE THE FRONT LINKS,

TO INSTALL MOWER (See Fig. 21)

» Raise attachment lift lever to its highest position.

• Slide mower undertractor with discharge guard to right

side of tractor

• Lower lift lever to its lowest position,

• Instai) mower in reverse order of removal instructions.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 29 30

No comments

Sears 917.25953 User Manual Page 21