Sears Kenmore Side by Side Refrigerator Troubleshooting Guide download pdf (Page 10)

REFRIGERATOR INSTALLATION

Reinstalling the right (refrigerator) door

Type 2

Type 1

Rivet

(1)

(2)

(3)

(4)

(5)

1. Place the door onto the lower hinge pin.

2. Fit top hinge (4) over hinge lever latch (5) into place. Rotate

lever (3) counterclockwise to secure hinge.

NOTE : Regardless of hinge lever type, reinstallation process is

the same.

3. Hook tab on switch side of corner under edge of wire

opening in cabinet top. Position cover (2) into place. Insert

and tighten cover screw (1).

Reinstalling the left (freezer) door

Type 2

Type 1

Rivet

(2)

(7)

(5)

(4)

(3)

(6)

(1)

1. Feed the water tubes through the lower hinge pin and place

the door onto the lower hinge pin.

2. Fit top hinge (6) over hinge lever latch (7) and into place.

Rotate lever (5) clockwise to secure hinge.

NOTE: Regardless of hinge lever type, reinstallation process is

the same.

3. Install the grounding screw (4) and connect all the wire

harnesses (3).

4. Hook tab on door switch side of cover (2) under edge of

wire opening in cabinet top. Position cover into place. Insert

and tighten cover screw (1).

5. Reconnect the water tubes by inserting the tubes into the

connectors.

Insert Line

Tube

Collet

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 28 29

Comments to this Manuals

No comments

Sears Kenmore Side by Side Refrigerator Troubleshooting Guide Page 10

Comments to this Manuals