Serial NumberDecalModel No. NTL99010.1Serial No.Write the serial number in the spaceabove for reference.CAUTIONRead all precautions and instruc-tions
109. IMPORTANT: To avoid damaging theCrossbar (93), do not use power tools anddo not overtighten the #10 x 3/4" Screws (9).Orient the Crossbar (9
1111. With the help of a second person, hold the con-sole assembly near the Left Handrail (88).Connect the Upright Wire (81) to the consolewire. See t
1213. Firmly tighten the four the 3/8" x 2 3/4" PatchBolts (7) and the four 3/8" x 1 1/4" Patch Bolts(8) (only one side is shown).
1314. Make sure there is a piece of cardboard belowthe rear of the Frame (56) and that the pieces offoam have been removed from the indicatedareas.Plu
1417. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plasticon the treadmill decals, remove the
15OPERATION AND ADJUSTMENTTHE PRE-LUBRICATED WALKING BELTYour treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Nev
16FEATURES OF THE CONSOLEThe treadmill console offers an impressive array offeatures designed to make your workouts more effec-tive and enjoyable. Whe
17HOW TO TURN ON THE POWERIMPORTANT: If the treadmill has been exposed tocold temperatures, allow it to warm to room tem-perature before you turn on t
184. Change the incline of the treadmill as desired.To change the incline of the treadmill, press theIncline increase or decrease button or one of the
196. Measure your heart rate if desired.Before using thehandgrip pulsesensor, removethe sheets ofplastic from themetal contactson the pulse bar.In add
TABLE OF CONTENTSWARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20HOW TO USE AN ONBOARD WORKOUT1. Insert the key into the console.See HOW TO TURN ON THE POWER on page 17.2. Select an onboard workout.To select an on
214. Follow your progress with the displays.See step 5 on page 18. If you select an onboardworkout, the display will show the time remaininginstead of
22When you select an iFit Live workout, the displaywill show the duration of the workout, the distanceyou will walk or run, and the approximate number
23THE INFORMATION MODEThe console features an information mode that keepstrack of treadmill information and allows you to person-alize console setting
24HOW TO FOLD THE TREADMILLTo avoid damaging the treadmill, adjust the inclineto the lowest position before you fold the treadmill.Then, remove the ke
25TROUBLESHOOTINGMost treadmill problems can be solved by following the simple steps below. Find the symptom thatapplies, and follow the steps listed.
26Locate the Reed Switch (52) and the Magnet (50)on the left side of the Pulley (49). Turn the Pulleyuntil the Magnet is aligned with the Reed Switch.
27PROBLEM: The walking belt is off-center or slips when walked onSOLUTION: a. If the walking belt is off-center, first remove thekey and UNPLUG THE PO
28These guidelines will help you to plan your exerciseprogram. For detailed exercise information, obtain areputable book or consult your physician. Re
29SUGGESTED STRETCHESThe correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce.1. Toe Touch StretchS
31. Before beginning any exercise program, con-sult your physician. This is especially impor-tant for persons over age 35 or persons withpre-existing
30PART LIST—Model No. NTL99010.1 R1010ATo locate the parts listed below, see the EXPLODED DRAWING near the end of this manual.Key No.Qty. DescriptionK
31Key No. Qty. Description Key No. Qty. Description101 1 Module Housing102 1 Console Back103 1 Console104 1 Console Frame105 1 Console Ground Wire106
532323194643495624201818544244604724734305923635255612346195014512121354522212222222101048231534305725961153034572593839404114394136363641393839413638
66107677742687510277333696771163370677165221929232327274222781919222226222222582222726868272722EXPLODED DRAWING B—Model No. NTL99010.1 R1010A33
89949229517179796339292713890777134864115818182831492823310115912897141414333377913179802222285883187372284234EXPLODED DRAWING C—Model No. NTL99010.1
98100993110710864252510610610410510121011021032222221129992111111141141135EXPLODED DRAWING D—Model No. NTL99010.1 R1010A
Part No. 304737 R1010A Printed in China © 2010 ICON IP, Inc.ORDERING REPLACEMENT PARTSTo order replacement parts, please see the front cover of this m
420. Never leave the treadmill unattended while itis running. Always remove the key, unplugthe power cord, and press the power switchinto the off posi
5Thank you for selecting the revolutionary NordicTrack®C900 treadmill. The C 900 treadmill offers an impres-sive selection of features designed to mak
6ASSEMBLYAssembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do notdispose of the packing materials u
73. Identify the Left Upright (89), which is markedwith a “Left” sticker or an “L” sticker. Have a sec-ond person hold the Left Upright near the Base(
85. Identify the Left Base Cover (82) and the RightBase Cover (83). Slide the Left Base Cover ontothe Left Upright (89). Slide the Right Base Coveront
97. Attach the Left Handrail (88) to the Left Upright(89) with two 5/16" x 1" Patch Bolts (5), two5/16" Star Washers (11), and a 5/16&q
Comments to this Manuals