Sears 934.53734090 SERIES Operations Instructions Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
ELECTRONIC ViEWFINDER POSiTiON ADJUSTMENT
The position of the Electronic Viewfinder can be adjusted so it can be viewed with the left eye as well as the right eye.
When viewing with right eye ® When viewing with left eye
ATTACHING THE TELEPHOTO OR WIDE-ANGLE LENS
Use the Telephoto attachment if you wish to make your
subject appear larger or the Wide-angle attachment to
make your subject appear wider.
1. To remove Lens Hood, put hand flat against Lens
Hood and turn it counterclockwise.
\
2. Remove both caps of the Telephoto Lens (Accessory
No. 6) or Wide-angle Lens (Optional Accessory).
3. Screw the lens into the threads on the front of Video
Camera/Recorder lens assembly.
NOTES:
Auto focusing will not operate correctly when the
Telephoto or Wide-angle lens is attached to the Video
Camera/Recorder.
o Shading at corners may occur near the Wide-angle
end (extreme of your zoom lens) and in the macro po-
sition.
LOADING BATTERY FOR DATE/CLOCK
You may want to install the clock battery (Accessory
No. 7) immediately to prevent misplacing it.
1. Pull the tab to open the cover and expose the
compartment.
2. Insert the clock battery with the '°+" terminal facing
out (as illustrated inside the battery cover).
3. Gently push the cover closed until it snaps into place.
NOTES:
When replacing the batteries, use 3V micro lithium
cell such as Maxell CR2025 or equivalent.
® Instructions for setting the time and date are on page
27. You can do that later if desired after you're more
familiar with your camera/recorder.
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

Comments to this Manuals

No comments