Sears 486.248392 Owner's Manual download pdf (Page 8)

INSTALLING HANGER BRACKETS

For better clearance, lower the tractor's suspension

arms using the attachment lift lever.

On Tractors With Foot Rest Brackets (Figure 7)

• Remove the bolt and nut that fasten the L.H. and

R.H. foot rest brackets to the frame. See figure 7.

• Attach the L.H. Hanger Bracket (marked "L") to the

inside of the tractor frame using two 3/8" x 1"

carriage bolts, 3/8" lock washers and 3/8" hex lock

nuts. The bolt heads go on the inside of the tractor

frame. Repeat for the R.H. side. See figure 7.

BOLT REMOVED

_ FROM THIS HOLE

3/8" LOCK -_

WASHER

3/8" HEX

LOCK NUT

SUSPENSION ARM

\ \\

L.H. HANGER

BRACKET

FIGURE 7 LEFT SIDE VIEW

INSTALLING SHOULDER BOLTS

(All Tractors)

Remove the bolt, washer and nut which fasten the

sway bar bracket to the L.H. side of the tractor

frame. Replace with a shoulder bolt and a 3/8" hex

lock nut as shown in figure 9.

FIGURE 9

I \

BOLT REMOVED

FROM THIS HOLE 3/8" HEX

\ LOCK NUT

\ SWAY BAR

\\'-. BRACKET /

LEFT SIDE VIEW

On Tractors Without Foot Rest Brackets (Figure 8)

• Find the empty hole beneath the foot rest. Attach

the L.H. Hanger Bracket (marked "L") to the inside

of the frame using a 3/8" x 1" carriage bolt (head to

inside), a 3/8" lock washer and a 3/8" hex lock nut.

See figure 8. Repeat for the R.H. side.

3_"LOCK__

WASHER 3_"HEX

_LOCKNUT

SUSPENSION ARM

3/8" x 1" LH. HANGER \

CARRIAGE BRACKET

BOLT

FIGURE 8 LEFT SIDE VIEW

Assemble a shoulder bolt and 3/8" hex lock nut to

the R.H. side of the tractor frame, using the first

empty hole to the rear of the R.H. hanger bracket.

See figure 10.

SHOULDER BOLT

R.H. HANGER BRACKET

FIGURE 10

RIGHT SIDE VIEW

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comments to this Manuals

No comments

Sears 486.248392 Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for Snow throwers Sears 486.248392