Sears 486.248463 User Manual download pdf (Page 7)

FIGURE 4 RIGHT SIDE VIEW

• Assemble the L.H. hanger bracket to the left side of

the tractor frame using two 3/8" x 1" hex bolts, two

3/8" lock washers and two 3/8" hex lock nuts as

shown in ﬁ gure 5.

FIGURE 3 RIGHT SIDE VIEW

FIGURE 6 LEFT SIDE VIEW

FIGURE 5 LEFT SIDE VIEW

• Assemble the R.H. hanger bracket to the bottom hole

where the mower stop bracket was removed and to

the upper hole under the front of the foot rest. Fasten

with two 3/8" x 1" hex bolts, 3/8" lock wash ers and

3/8" hex lock nuts. (On tractors with mufﬂ er guards,

slide the hanger bracket between the guard and the

tractor frame.) See ﬁ gure 4.

• Assemble a frame bracket to the L.H. foot rest and

sway bar bracket as shown in ﬁ gure 6. Use two 3/8"

x 1-1/4" hex bolts,

three

spacers and two 3/8" lock

wash ers.

• Assemble a shoulder bolt to the inside of the L.H.

frame bracket, securing it with a 3/8" lock wash er and

a 3/8" hex lock nut. See ﬁ gure 6.

• Repeat with a frame bracket on the R.H. side of the

tractor. Attach in the same manner but use

four

spac ers (two per bolt).

•

Proceed to page 9.

• Remove the mower stop bracket and its two bolts and

nuts from the R.H. side of the tractor frame as shown

in ﬁ gure 3.

• If the tractor has a mufﬂ er guard at the front of the

R.H. foot rest, remove the bottom bolt and nut, and

the washer which is located between the guard and

the tractor frame. See ﬁ gure 3.

• Remove the two bolts from the bottom of both the

R.H. and L.H. foot rests. See ﬁ gure 3.

If you have a 54" mower deck go directly to page 8.

All other deck sizes use the fol low ing in struc tions.

MOWER STOP

BRACKET

MUFFLER GUARD

(ONLY MODELS WITH

SIDE MUFFLER)

3/8" x 1"

HEX BOLT

3/8" LOCK

WASHER

3/8" HEX

LOCK NUT

R.H. HANGER

BRACKET

MUFFLER GUARD

(ONLY MODELS WITH

SIDE MUFFLER)

3/8" x 1"

HEX BOLT

3/8" LOCK

WASHER

3/8" HEX

LOCK NUT

L.H. HANGER

BRACKET

3/8" LOCK

WASHER

L.H. FRAME

BRACKET

3/8" x 1-1/4"

HEX BOLT

3/8" LOCK

WASHER

3/8" HEX

LOCK NUT

SHOULDER

BOLT

SWAY BAR

BRACKET

(2) SPACERS

(1) SPACER

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comments to this Manuals

No comments

Sears 486.248463 User Manual Page 7

Comments to this Manuals

Related products and manuals for Snow throwers Sears 486.248463