Sears 934.5512559 User Manual download pdf (Page 21)

DAILY PROGRAM

(MONDAY-SUNDAY)

To record a program at the same time on the same chan-

nel every day, follow steps [1] to [5] on page 19, then

step [6a] below.

Select item 2(DAILY) with

number buttons.

I_ILY PROGAAIO _]

1_O3RAM MJtaBER I

IENOTIME _ _1_:._ -

TAPE SPEED - -

OATE --I--

Continue with step [7] on page 20 onwards.

WEEKLY PROGRAM

To record a program at the same time on the same chan-

nel every week, follow steps [I] to [5] on page 19, then

step [6b] below.

Select item 3(WEEKLY) _o,,_E'...... E.,,,"_'_-._._ :

TAPE SPEED --

with number buttons. _TE .....

Continue with step [7] on page 20 onwards.

CHECKING TIMER PROGRAMS

To check a program that is to be recorded using the

Automatic Timer Program when the VCR is in the

timer-record mode:

1) Turn on the TV and set the TV channel to the same

video output channel located on the back of the

VCR. (CH 3 or 4)

2) Press POWER/TIMER REC button so that the

"@" indicator disappears from the display.

3) Press the TV/VCR button so that "VCR" appears

on the display.

4) Follow instructions in steps [2] to [5] on page 19.

Information which was set for programming will

now appear.

TO STOP RECORDING

Press STOP button on the VCR.

• If you are recording using the Automatic Timer Pro-

gram, you may not operate the unit manually, but,

you may still stop the recording by pressing

STOP/EJECT button on the VCR.

NOTE: STOP button on the remote control will not

function in the Automatic Timer Recording mode.

TO CORRECT OR CANCEL

A PROGRAM

• Press ADD/DELETE button to go back one step

from current step during steps [5]~[14].

• If you finished setting program, repeat steps [2] to

[4] on page 19. Then press SELECT button repeat-

edly until your desired digit flashes and reset pro-

gram.

• You may cancel the entire program by pressing

ADD/DELETE button at step [5].

AUTOMATIC TIMER RECORDING

HINTS

• If there a power failure or the VCR is unplugged for

more than 3 seconds, the clock setting and all timer

settings are lost.

• If the tape runs out before the end time, the VCR will

switch to the Stop mode immediately, eject the tape

and the VCR power will be turned off. The "[]" in-

dicator will flash.

• If a tape is not inserted or the erase-protection tab is

removed, the "@" indicator flashes and automatic

timer recording cannot occur. Insert a tape that al-

lows recording.

• The TV that is connected to your VCR may be turned

ON or OFF when the VCR is in the timer-record mode.

- 21 - EN

***'if* 5CI6

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

Comments to this Manuals

No comments

Sears 934.5512559 User Manual Page 21

Comments to this Manuals

Related products and manuals for CRT TVs Sears 934.5512559