Sears Kenmore Three-Speed with Options and Speeds Switch AUTOMATIC WASHERS Service Manual download pdf (Page 28)

DRAIN ERROR

Is displayed?

Check the connectors at the

main PCB and the drain

pump. Are the connectors

loose or disconnected?

Reconnect or

repair

the connector.

Yes

Circulation pump

Yes

Drain pump

Connection connector

When you press both

WASH/RINSE button and

DELAY START button

simultaneously, is the

water level <250?

Proceed to next step at right

Check the air

dome and

pressure hose

for clogging.

Check the

pressure

switch. See

test #2.

Measure the resistance of

the drain pump motor. Is

the resistance between 10Ω

and 20Ω ?

(Refer to 9-4 Pump motor

assembly.)

Replace the

DRAIN PUMP

ASSEMBLY.

Yes

Check the voltage between

the main PCB connectors

NA4-1 BN and BL3-1 BK. Is

the voltage 120 VAC ± 5%?

TO TURN ON THE DRAIN PUMP:

1. Turn on the washer

2. Press the SPIN SPEED button to select LOW

speed.

3. Press the START/PAUSE button.

The drain pump will be energized for several

minutes at the beginning of the spin cycle.

ALWAYS CHECK FOR EXTERNAL CAUSES

Kinked or clogged drain hose

Frozen drain hose

Foreign objects clogging the drain pump filter

Foreign objects caught in pump impeller

Replace the

MAIN PWB

ASSEMBLY.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 60 61

Comments to this Manuals

No comments

Sears Kenmore Three-Speed with Options and Speeds Switch AUTOMATIC WASHERS Service Manual Page 28

Comments to this Manuals

Related products and manuals for Washing machines Sears Kenmore Three-Speed with Options and Speeds Switch AUTOMATIC WASHERS