Sears LIFESTULER SYSTEM 40 831.15931 User Manual download pdf (Page 6)

6. 6

6

Slide a Cable Trap (3) and a Small Pulley (1)

onto a 3/8" x 4 1/2" Bolt (13). Route the 265"

Cable (54) up around the Small Pulley. Make

sure that the Cable is between the Cable

Trap and the Small Pulley.

Insert the 3/8" x 4 1/2" Bolt (13) through the

indicated hole in the Leg Press Lever (22).

Finger tighten a 3/4" Nylock Nut (4) onto the

Bolt.

o

Slide a Cable Trap (3) and a Small Pulley (1)

onto a 3/8" x 5" Bolt (77). Route the 265"

Cable (54) down around the Small Pulley.

Make sure that the Cable is between the

Cable Trap and the Small Pulley.

Hold the "U" Bracket (44) inside the opening

in the Press Frame (20). Insert the 3/8" x

5" Bolt (77) through the indicated hole in

the Press Frame. The Bolt should hold the

"U" Bracket in the Press Frame. Finger tight-

en a 3/4" Nylock Nut (4) onto the Bolt.

.

Slide a Cable Trap (3) and a Small Pulley (1)

onto a 3/8" x 2" Bolt f9_. Route the 265"

Cable (54) up around the Small Pulley. Make

sure that the Cable is between the Cable

Trap and the Small Pulley.

Insert the 3/8" x 2" Bolt (9) through the indi-

cated bracket on the Bench Press Arm (21).

Tighten a 3/8" Nylock Nut (4) onto the Bolt.

°

Route the 265" Cable (54) through the "U"

Bracket (44) in the Press Frame (20). Attach

a Small Pulley (1) to the "U" Bracket with a

3/8" x 2" Bolt (9) and 3/8" Nylock Nut (4).

7

8

9

22

44

13

II. s, Ill

\

\

\

\

\\

77

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Comments to this Manuals

No comments